| Singlemode MOA-3800 — Optical specifications1 | |
| Attenuation range2 | 40 dB min. |
| Dynamic power range3 | -32 to 13 dBm |
| Output accuracy3 | +/- 0.3 dB max. |
| Tuning resolution | 0.01 dB |
| Excess loss4 (VOA only) | 0.8 dB max |
| Excess loss4 (Self-adjusting) | 1.6 dB max |
| WDL of VOA only5 (0 - 5 dB) | 0.2 dB max.7 |
| WDL of VOA only5 (5 - 10 dB) | 0.3 dB max.8 |
| WDL of VOA only5 (10 - 20 dB) | 0.7 dB max.8 |
| WDL of Self-adjusting5 (0 - 10 dB) | 0.5 dB max.6 |
| WDL of Self-adjusting5 (10 - 20 dB) | 0.7 dB max.8 |
| PDL9 (0 - 15 dB) | 0.15 dB max. |
| PDL9 (15 - 20 dB) | 0.2 dB max. |
| Back reflection | -50 dB max. |
| Optical power (VOA only) | 500 mW Max. |
| Optical power (Self-adjusting) | 200 mW Max. |
| Operating temperature | 0 to 50 oC |
| Storage temperature | -20 to 60 oC |
| Relative humidity | 0% to 80% non-condensing |
| Repeatability10 | 0.1 dB max. |
| Durability | 1 x 109 cycles min. |
| Fiber type | 9/125 um singlemode |
| Operating wavelength range | 1290 - 1650 nm |
| Multimode MOA-3800 — Optical specifications1 | |
| Attenuation range | 30 dB min. |
| Dynamic power range2 | -30 to 10 dBm |
| Tuning speed | 50 ms min., 1400 ms max. |
| Excess loss3, 4 (VOA only) | 0.8 dB typ., 1.3 dB max |
| Excess loss3, 4 (Self-adjusting) | 1.8 dB typ., 2.3 dB max |
| Accuracy4 (VOA only5) | +/- 0.2 dB max. |
| Accuracy4 (Self-adjusting6) | +/- 0.3 dBm max. |
| Resolution (VOA only5) | 0.01 dB |
| Resolution (Self-adjusting6) | 0.01 dBm |
| Back reflection4 | -20 dB max. |
| Optical power | 300 mW Max. |
| Operating temperature | 0 to 50 oC |
| Storage temperature | -20 to 60 oC |
| Relative humidity | 0% to 80% non-condensing |
| Fiber type | 50/125 um multimode, or 62.5/125 um multimode |
| Operating wavelength range | 850 & 1310 nm |
| Singlemode: 1. All specifications are without connectors, at 23 ± 5 oC. 2. Default power off state does not add any attenuation (transparent). 3. Specification valid for Self-Adjusting closed-loop mode only. 4. Excess Loss is the insertion loss when set to 0 dB of attenuation. 5. Wavelength dependent loss (WDL) is defined as the maximum deviation in insertion loss at a given attenuation setting, measured 1528 - 1563 nm. 6. Add 0.1 dB for operation over 1290 - 1330 nm, or 1570 - 1610 nm. 7. Add 0.2 dB for operation over 1290 - 1330 nm, or 1570 - 1610 nm. 8. Add 0.3 dB for operation over 1290 - 1330 nm, or 1570 - 1610 nm. 9. Polarization Dependent Loss (PDL) is measured at 1550 nm. Add 0.1 dB for operation at 1310 or 1590 nm. 10. Repeatability is defined within 100 cycles. Multimode: 1. All specifications are without connectors, at 23 ± 5 oC. 2. When in Self Adjusting mode. 3. Excess Loss is the insertion loss when set to 0 dB of added attenuation. 4. At calibration wavelength. 5. Specification is valid over an attenuation range of 0 - 20 dB. 6. Specification is valid when in Self-Adjusting mode. If Self-Adjusting unit is used in attenuation mode, then the VOA Only accuracy specification is valid. | |
| Singlemode MOA-3800 — Electrical and mechanical specifications | |
| Latching type | Non-latching |
| Control type | Ethernet interface with EXFO SCPI command set |
| Supply voltage | AC 100 - 240 V, 50/60 Hz |
| Housing size | Height: 43.7 mm (1U) Width: 483 mm (19”) Depth: 345 mm |
| Multimode MOA-3800 — Electrical and mechanical specifications | |
| Latching type | Non-latching |
| Control type | Ethernet interface with EXFO SCPI command set |
| Supply voltage | AC 100 - 240 V, 50/60 Hz |
| Housing size | Height: 88 mm (2U) Width: 483 mm (19”) Depth: 434.5 mm |