Especificaciones completas

FTBx-945 Fiber Certifier OLTS

Resumen
OLTS test module for data center and enterprise Tier 1 fiber certification.
FTBx-945 Fiber Certifier OLTS

Características principales

  • Certify two fibers at two wavelengths in less than 3 seconds with FasTesT™
  • On-board assistant and diagnosis to reduce the risk of reference errors and negative loss
  • Built-in Encircled-Flux compliancy as per ANSI/TIA and ISO/IEC
  • 100% automated fiber inspection: one-step process with pass/fail analysis at both ends
  • Certifies to multiple industry standards simultaneously
  • On-board professional PDF reporting

Aplicaciones

  • Data centers
  • Enterprise structured cabling

Especificaciones

Technical specifications
Input connectorInterchangeable adapter (LC, SC or FC)(b)
Detector typeInGaAs
Uncertainty(c)±(5 % + 32 pW)
Measurement range (dBm)5 to –75
Calibrated wavelengths (nm)850, 1270, 1290, 1300, 1310, 1330, 1350, 1370, 1383, 1390, 1410, 1430, 1450, 1470, 1490, 1510, 1530, 1550, 1570, 1590, 1610, 1625, 1650
Tone detection (Hz)270/330/1000/2000
Testing speed(d)FasTesT™ Duplex: 3 seconds (two wavelengths, one direction, automated, IL + fiber length)
FasTesT™ Simplex: 5 seconds (two wavelengths, bidirectional, automated, IL + ORL + fiber length)
Input/Output connectorsInterchangeable adapter (LC, SC or FC)(b)
Wavelengths (nm)(d)MM (LED)
850 ± 20
1300 ± 20
Launch condition(e)EF compliancy guaranteed at multimode source port
Within TIA-526-14-B, ISO/IEC 14763-3 and IEC 61280-4-1 Encircled Flux template limits at the end of an EXFO reference-grade 50/125 µm test cord
Length measurement range (km)Multimode: 20(f)
Singlemode: 200
Length measurement uncertainty(d)(g)±(0.5 m + 0.5 % × length)
ORL measurement range (dB)(d)(h)50
ORL measurement uncertainty (dB)(d)(h)(i)± 1
Output power (dBm)(d)Multimode: –25
Singlemode: 2.5
Output power stability (dB)±0.05 over 8 h
Spectral width (FWHM) (nm)850 nm: 30 to 60
1300 nm: 100 to 150
Note: At 23 °C ± 1 °C and 1550 nm, on batteries and after 15 minutes of warm up, unless specified otherwise.
(b) Specifications are provided with FC type connectors.
(c) Uncertainty is valid at calibration conditions.
(d) Typical.
(e) Measured at 850 nm with SC connector.
(f) At 1300 nm.
(g) In duplex.
(h) ORL measurement available on MaxTester 945 singlemode wavelengths only.
(i) No discrete reflectance greater than —65 dB. Up to 45 dB
General specifications
Size (H × W × D)158 mm × 25 mm × 196 mm (6 ¼ in × 1 in × 7 ¾ in)
Weight0.4 kg (0.9 lb)
TemperatureOperating: 0 °C to 50 °C (32 °F to 122 °F)
Storage: –30 °C to 70 °C (–22 °F to 158 °F)
Relative humidity0% to 95% non-condensing
Calibration interval (years)3
Warranty (year)1