Especificaciones completas

XTA-50 - filtro ajustable con ancho de banda ajustable

Resumen
Control electrónico con ajuste independiente y preciso de la longitud de onda central y del ancho de banda. Cubre de 1260 a 1650 nm y anchos de banda entre 32 pm (4 GHz) y 5 nm.
XTA-50 - filtro ajustable con ancho de banda ajustable

Características principales

  • Filtro plano de ancho de banda ajustable
  • Bordes de filtro extremadamente definidos
  • Alto grado de aislamiento
  • Rango de longitud de onda de 200 pm
  • Alta precisión y repetibilidad
  • El filtro más angosto, la mayor selectividad

Aplicaciones

  • Selección de canales para pruebas de tasas de errores de bits
  • Análisis de subbanda de formatos de modulación complejos
  • Reducción de separación entre canales
  • Pruebas de sistemas WDM-PON y DWDM
  • Análisis de amplificación
  • Emulación de ROADM en cascada
  • OFDM
  • Pruebas de módulos y componentes activos
  • Pruebas de transpondedores

Especificaciones

Technical specifications
Models XTA-50 standard; XTA-50 ultrafine; XTA-50 O-band a; XTA-50 wide
Wavelength range (nm) Standard: 1450 to 1650; Ultrafine: 1480 to 1620; O-band: 1260 to 1360; Wide: 1525 to 1610
Wavelength resolution (pm) Standard: 1; Ultrafine: 1; O-band: 1; Wide: 1
Wavelength accuracy (pm) b Standard: ±30; Ultrafine: ±30; O-band: ±30; Wide: ±30
Wavelength tuning speed (s) Standard: 1; Ultrafine: 1; O-band: 1; Wide: 1
Minimum bandwidth (FWHM) Standard: 50 pm (6.25 GHz); Ultrafine: 32 pm (4 GHz); O-band: 50 pm (8 GHz); Wide: 50 pm (6.25 GHz)
Maximum bandwidth (FWHM) Standard: 950 pm (120 GHz); Ultrafine: 650 pm (80 GHz); O-band: 900 pm (160 GHz); Wide: 5000 pm (625 GHz)
Bandwidth resolution (pm) Standard: 1; Ultrafine: 1; O-band: 1; Wide: 1
Bandwidth tuning speed (s) Standard: 1; Ultrafine: 1; O-band: 1; Wide: 1
Filter edge roll-off (dB/nm) Standard: 500 (typical) c; Ultrafine: 800 (typical); O-band: 500 (typical) c; Wide: 500 (typical) d
Insertion loss (dB) Standard: 5 (4.5 dB typical) e, f; Ultrafine: 5 (4.0 dB typical) f, g; O-band: 5 (4.5 dB typical) f, h; Wide: 5 (4.5 dB typical) i, j
Flatness (dB) Standard: 0.2 k; Ultrafine: 0.2 l; O-band: 0.3 k, m; Wide: 0.2 n
Polarization dependent loss (dB) Standard: ±0.2 e; Ultrafine: ±0.2 g; O-band: ±0.2 h; Wide: ±0.2 i
Out-of-band suppression (crosstalk) Standard: 40 dB (60 dB typical) o; Ultrafine: 40 dB (50 dB typical) o; O-band: 40 dB (60 dB typical) o; Wide: 40 dB (45 dB typical) o
Interfaces
Display 7 inch resistive touch-screen (resolution 800 x 480)
Communication interfaces USB-B, Ethernet (x2)
Display and other interfaces HDMI, display port, USB-A 3.2 (x3), USB-A 2.0 (x1)
Optical fiber type Standard: SMF or PMF; Ultrafine: SMF or PMF; O-band: SMF or PMF; Wide: SMF
Connector type FC/PC or FC/APC
a. Specifications apply for wavelengths not equal to anywater absorption line.
b. With "Backlash suppression" setting enabled.
c. Between –3 and –40 dB for FWHM < 800 pm.
d. Between –3 and –40 dB. Typically 550 dB/nm at FWHM = 50 pm, 450 dB/nm at FWHM = 1 nm, 225 dB/nm at FWHM = 5 nm.
e. From 1500 nm to 1600 nm and FWHM > 100 pm.
f. At lowest FWHM the insertion loss is 7 dB typical.
g. From 1500 nm to 1600 nm and FWHM > 60 pm.
h. From 1280 nm to 1340 nm and FWHM > 100 pm.
i. For FWHM > 100 pm.
j. At lowest FWHM the insertion loss is < 7.0 dB.
k. Centered width of FWHM-150 pm. For 150 pm < FWHM < 650 pm.
l. Centered width of FWHM-100 pm. For 100 pm < FWHM < 500 pm.
m.From 1280 nm to 1340 nm.
n. Centered width of FWHM-150 pm. For 150 pm < FWHM < 2000 pm.
o. Measured 1 nm away from the –3 dB points.
General specifications
Temperature range 15 °C to 35 °C (59 °F to 95 °F)
Maximum optical input power (dBm) Standard: 30; Ultrafine: 30; O-band: 30; Wide: 27
Dimensions (W x D x H) 254 mm x 385 mm x 154 mm (10 in x 15 1/8 in x 6 in)
Weight 6.5 kg (14.33 lb)