完整规格

FLS-240 - 可视故障定位仪

概述
简单直接的解决方案,用于识别断裂、弯曲、故障连接器、熔接以及导致信号损耗的其它原因。
FLS-240 - 可视故障定位仪

主要优点

  • 故障检测距离最高可达5 km
  • 635 nm的明亮红色激光
  • 脉冲和CW运行时间长达50小时(典型值)
  • 用于2.5 mm或1.25 mm插针的通用连接器

应用

  • 断裂和弯曲定位
  • 光纤识别

规格

Technical specifications
Operation (Hz) (a) 2 to 4
Wavelength (nm) 630 to 645
Emitter type Laser
Power output (b) (typical) (mW) 0.8
Distance range (c) (typical) (km) 5
Operation mode Pulsed and CW
Laser safety standards IEC 60825-1:2007; 21 CFR 1040.10
Laser classification Class 2M laser product; λ: 635 ± 10 nm; Ppk < 1 mW; complies with 21 CFR 1040.10 except for deviations pursuant to Laser Notice No. 50 dated 2007
a. Specifications are valid at 23 °C ± 1 °C.
b. Only valid with 50/125 µm fiber.
c. Depends on fiber attenuation.
*. Typical length of continuous fiber at which end-to-end identification is possible. VFL depends on ambient light conditions at test site.
General specifications
Power supply 2 AAA alkaline batteries
Laser class 2M
Battery life (d) (h) CW 35
Battery life (d) (h) Pulsed 50
Length 17.5 cm (6 7/8 in)
Maximum diameter 2.5 cm (1 in)
Weight without batteries 80 g (4.8 oz)
Weight with batteries 120 g (6.3 oz)
Temperature — operating −10 °C to 50 °C (14 °F to 122 °F)
Temperature — storage −30 °C to 60 °C (−22 °F to 140 °F)
Standard accessories User guide, two AAA alkaline batteries, belt clip and certificate of compliance
d. Typical battery life using AAA alkaline batteries. Battery life may fluctuate significantly, depending on specific unit’s laser current.