| OTDR modules | FTBx-735C-SM7R; FTBx-750C-SM3 |
| Wavelength (nm) | FTBx-735C-SM7R: 1650; FTBx-750C-SM3: 1310/1550/1625 |
| Internal filter for in-service testing | FTBx-735C-SM7R: Yes; FTBx-750C-SM3: No |
| Dynamic range at 20 μs (dB)a | FTBx-735C-SM7R: 41; FTBx-750C-SM3: 45 |
| Event dead zone (m)b | FTBx-735C-SM7R: 0.6; FTBx-750C-SM3: 0.5 |
| Attenuation dead zone (m)c | FTBx-735C-SM7R: 2.5; FTBx-750C-SM3: 2.5 |
| PON dead zone (m)d | FTBx-735C-SM7R: 30; FTBx-750C-SM3: n/a |
| Sampling resolution — minimum value (m) | FTBx-735C-SM7R: 0.04; FTBx-750C-SM3: 0.04 |
| Sampling points | FTBx-735C-SM7R: Up to 256 000; FTBx-750C-SM3: Up to 256 000 |
| HRD measurement time (s)e | FTBx-735C-SM7R: 5; FTBx-750C-SM3: n/a |
| HRD measurement loss range (dB) | FTBx-735C-SM7R: 11 to 35; FTBx-750C-SM3: n/a |
| HRD minimum distance separation (m)f | FTBx-735C-SM7R: 0.6; FTBx-750C-SM3: n/a |
| First splitter to HRD maximum distance (km) | FTBx-735C-SM7R: 8; FTBx-750C-SM3: n/a |
| Source mode tone frequencies (Hz) | FTBx-735C-SM7R: 270, 330, 1000, 2000; FTBx-750C-SM3: 270, 330, 1000, 2000 |
| MEMS optical switch modules | FTBx-9160; FTBx-9110 |
| Number of output ports | FTBx-9160: 4; FTBx-9110: 12 |
| Operation wavelength range (nm) | FTBx-9160: 1290-1650; FTBx-9110: 1260-1650 |
| Insertion loss at 1530 nm - 1650 nm (dB)g | FTBx-9160: 0.7; FTBx-9110: 1.6 |
| Lifetime in cycles | FTBx-9160: >1 billion (109); FTBx-9110: >1 billion (109) |
| Interface | FTBx-9160: SC-APC; FTBx-9110: LC-APC |
| a. Typical dynamic range with three-minute averaging at SNR=1. b. Typical for reflectance from –35 dB to –55 dB, at 3-ns pulse. c. Typical for reflectance at –55 dB. d. Non-reflective FUT, non-reflective splitter, 13-dB loss, 50-ns pulse, typical value. e. Excluding networking latency — for a PON F2/distribution range of 4 km with nominal loss of 20 dB. f. Typical, for similar level of attenuation between both. g. Typical, including loss of one connector. | |
| Mainframe | Quad-core Intel i7 processor / 8 GB / Linux embedded |
| Front interfaces | RJ45 10/100/1000 Mbit/s (management port); USB 3.0 |
| Rear interfaces | RJ45 10/100/1000 Mbit/s (management + Ethernet ports) (2); USB 3.0 (5); Relay contact: 3 (power, system and user configurable) |
| Storage | 128 GB SSD internal memory |
| Power supply | –48VDC DC, 10A (ordering option: external AC-DC adapter for AC operation) |
| Power consumption | Idle state: 25 W; OTDR measuring: 40 W (typical) |
| Dimensions (H × W × D) (includes brackets) | 44 mm (1U) × 482 mm × 262 mm (1 3/4 in × 19 in × 10 5/16 in) |
| Weight (includes brackets) | 5.1 kg (11.2 lb) |
| Temperature | Operating: –5 °C to 50 °C (23 °F to 122 °F); Storage: –40 °C to 70 °C (–40 °F to 158 °F) |
| Relative humidity | < 95 % non-condensing |
| Certification marks | China RoHS; WEEE Recycling |
| EMC/EMI | EN 61326-1 (Immunity Industrial level), EN 55011, CISPR 11, FCC 47 CFR Part 15, Subpart B, ICES-001, ETSI/EN 300 386 |
| Electrical safety | IEC/EN 61010-1, USA/UL 61010-1, CAN/CSA-C22.2 61010-1-12 |
| Optical safety | IEC 60825-1 |
| NEBS | GR-63-CORE, GR-1089-COREa |
| ETSI | ETSI/EN 300 019-2-1, ETSI/EN 300 019-2-2, ETSI/EN 300 019-2-3, ETSI/EN 300 386, ETSI/EN 300 753, ETSI/EN 300-132-2 |
| a. The equipment is NEBS-compliant based on Verizon VZ.TPR.9303 for test and measurement equipment-permanent installation for DC Powered, permanent installation type 2 equipment, and AT&T ATT-TP-76200 (Carrier Grade level 1). Contact Factory or visit the following URL for more details about this certification: www.verizonnebs.com/TPRs/VZ-TPR9303.pdf | |