Especificaciones completas

FOT-600 - Conjunto de pruebas de pérdida óptica

Resumen
El Conjunto de pruebas de pérdida óptica FOT-600 es la herramienta ideal para la calificación de enlaces de red. Forma parte de la serie portátil 600 de EXFO, que incluye el Medidor de potencia FPM-600 y la Fuente de luz FLS-600.
FOT-600 - Conjunto de pruebas de pérdida óptica

Características principales

  • Funciones sin errores, que permiten ahorrar tiempo: reconocimiento automático de longitudes de onda, y no se requiere anulación de desviación
  • Fácil gestión de datos y transferencia a PC vía USB
  • Función de conmutación automática de longitud de onda para pruebas de múltiples longitudes de onda
  • Localizador visual de fallos (VFL) estándar para una rápida y sencilla solución de problemas

Aplicaciones

  • Caracterización de pérdida de enlaces
  • Certificación de red

Especificaciones

Technical specifications
Power meter specifications
DetectorGeX
Power range (dBm)b26 to −55
Wavelength range (nm)800 to 1650
Calibrated wavelengths (nm)800, 820, 830, 840, 850, 860, 870, 880, 910, 980, 1060, 1270, 1280, 1290, 1300, 1310, 1320, 1330, 1340, 1370, 1390, 1450, 1460, 1470, 1480, 1490, 1500, 1510, 1520, 1530, 1540, 1550, 1560, 1570, 1580, 1590, 1600, 1610, 1620, 1630, 1640, 1650
Power uncertaintyc±5 % ± 3 nW
Resolution (dB)±0.01 (26 dBm to −45 dBm)
Automatic offset nullingdYes
Display unitsdB, dBm, W
Tone generation and detection270 Hz, 1 kHz, 2 kHz
Auto-switchingeYes
Warm-up period (min)f0
Data storage (items)≥1000
Battery life (hours) (typical)72 (power meter mode); 50 (source or OLTS in Auto mode)
Source specifications
Central wavelength (nm)1310 ± 20; 1550 ± 20
Spectral width (nm)g≤5
Output power (dBm)≥1
Power stability (dB) 15 minh±0.03
Power stability (dB) 8 hh±0.1
Automatic wavelength recognitioneYes
Recommended calibration period (years)3
Warranty (year)1
Visual fault locator (VFL)
Emitter typeLaser
Wavelength (nm)650
Output power (dBm)a3
a. Typical value in 62.5/125 µm fiber.
b. Specified in continuous-wave (CW) mode; sensitivity based on six times the rms noise level.
c. Applies at calibrated wavelengths, valid up to 20 dBm.
d. Available for input powers above −25 dBm.
e. Auto functions specified for 850, 1300, 1310, 1490, 1550 and 1625 nm when input power exceeds −40 dBm (typical).
f. Warm-up not required to stay within ±0.06 dB for powers ≥ −25 dBm.
g. Spectral width is rms for FP lasers.
h. Long-term stability defined after 15 minutes warm-up, using an APC connector on the power meter (PC connector for multimode); value is ± half the peak-to-peak variation over the stated period.
Specifications are guaranteed unless stated otherwise and are valid at 23 °C ± 1 °C with an FC connector and detector at 1550 nm.
General specifications
Size (H × W × D)190 mm × 100 mm × 62 mm (7 ½ in × 4 in × 2 ½ in)
Weight0.48 kg (1.1 lb)
TemperatureOperating: −10 °C to 50 °C (14 °F to 122 °F)
Storage: −40 °C to 70 °C (−40 °F to 158 °F)
Relative humidity0 % to 95 % non-condensing
Standard accessoriesUser guide, certificate of calibration, instrument stickers in six languages, AC adapter/charger, connector adapter (FOA-XX), lithium-ion battery, shoulder strap, carrying case, USB cable, reporting software