| Feature | Specification |
| Frequency range (RF modules) | TA-FR1: 450 MHz to 6 GHz; TA-FR2: 24.25 GHz to 40 GHz |
| Analysis bandwidth | 100 MHz (TA-FR1 and TA-FR2) |
| RF max safe level input | TA-FR1: 30 dBm peak typical, ±50 VDC (≥ 10 dB attenuation); TA-FR2: 20 dBm peak typical, ±50 VDC (≥ 10 dB attenuation) |
| Preamplifier | Yes (TA-FR1 and TA-FR2) |
| Attenuator (auto/manual) | 0 to 30 dB, 10 dB steps (TA-FR1 and TA-FR2) |
| Connector | TA-FR1: RF IN SMA female connector; TA-FR2: RF IN 2.92 mm (K) male connector |
| Spectrum analyzer traces | Max, Sample, Max Hold, Min Hold; displays all traces at the same time |
| Spectrum analyzer frequency | TA-FR1: 450 MHz to 6 GHz; TA-FR2: 24.25 GHz to 40 GHz |
| Frequency reference (accuracy) | ±0.35 ppm (including aging for 2.5 years) |
| Markers (spectrum analyzer) | Display 12 markers; apply on Max, Sample, Max Hold, Min Hold traces; Go to Peak, Snap to Peak (patent-pending) |
| Audible tone (spectrum analyzer) | Audible tone linked to each marker for interference hunting (configurable level-limit lines) |
| Persistence spectrogram (spectrum analyzer) | Apply on Max, Sample, Max Hold, Min Hold traces; 30 seconds, amplitude scale user selectable, 2D and 3D |
| RBW/VBW | 58 Hz to 120 kHz / 1:1, 3:1, 10:1, 30:1, 100:1 |
| Gated sweep | Zero span and gate configuration to visualize TDD signals; patent-pending synchronization with 5GNR and LTE frames; SSB scanner to scan, detect and sync onto 5G signals |
| Spectral purity (offset SSB phase noise at 1 GHz) | 10 KHz: –98 dBc/Hz; 100 KHz: –105 dBc/Hz; 1 MHz: –125 dBc/Hz; 10 MHz: –137 dBc/Hz |
| Spectral purity (offset SSB phase noise at 25 GHz) | 10 KHz: –85 dBc/Hz; 100 KHz: –93 dBc/Hz; 1 MHz: –104 dBc/Hz; 10 MHz: –127 dBc/Hz |
| Spurs (typical values) | Residuals < –100 dBm (50 ohms termination, 0 dB attenuation, preamp off) |
| Third-order intercept (TOI, typical values) | 450 MHz to 3 GHz: 10.1 dBm; 3 GHz to 6 GHz: 7.2 dBm; 24.5 GHz to 30 GHz: 13.82 dBm; 30.5 GHz to 39.5 GHz: 14.44 dBm |
| Amplitude ranges (1 GHz) | DR: 2/3* (TOI-DANL at 1 Hz RBW): > 104 dB; measurement range: DANL to 30 dBm; DR: 2/3* (TOI-DANL at 1 Hz RBW): > 105 dB; measurement range: DANL to 20 dBm |
| Displayed average noise level (DANL typical values, TA-FR1) | Preamp ON: 1 GHz –167 dBm/Hz, 2-3 GHz –167 dBm/Hz, 4-6 GHz –166 dBm/Hz; Preamp OFF: 1 GHz –151 dBm/Hz, 2-3 GHz –149 dBm/Hz, 4-6 GHz –151 dBm/Hz |
| Displayed average noise level (DANL typical values, TA-FR2) | Preamp ON: 24.5-36.5 GHz –160 dBm, 37-40 GHz –161 dBm; Preamp OFF: 24.5-36.5 GHz –142 dBm, 37-40 GHz –143 dBm |
| Input VSWR | TA-FR1: 1.3:1 (nominal); TA-FR2: 2.3:1 (nominal) |
| Channel power (typical amplitude uncertainty) | 2 dBm (TA-FR1 and TA-FR2) |
| RTSA bandwidth | 6.25, 12.5, 25, 50, 100 MHz |
| RTSA traces | Persistent real-time spectrum with variable decay (0-10 seconds) and infinite decay; Max, Sample, Average, Max Hold, Min Hold; displays all traces at the same time |
| RTSA markers | Display 12 markers; apply on Max, Sample, Average, Max Hold, Min Hold traces; Go to Peak, Snap to Peak |
| Audible tone (RTSA) | Audible tone linked to each marker for interference hunting (configurable level limit lines) |
| Persistence spectrogram (RTSA) | Apply on Max, Sample, Average, Max Hold, Min Hold traces; 30 seconds, amplitude scale user selectable, 2D and 3D |
| POI (probability of intercept) | 50 μs (100 MHz bandwidth) |
| FFT rate | 60 000 FFT/s |
| 5G signal analyzer | Frequency range: 450 MHz to 6 GHz (FR1) and 24.25 GHz to 40 GHz (FR2); analysis bandwidth up to 100 MHz; band configuration: manual or selectable band number, absolute radio frequency channel number (ARFCN), auto subcarrier spacing (SCS) |
| 5G multi-beam view | Physical-layer cell ID, beam index, SCS, SSB periodicity (auto-detected), SS-RSRP (dBm), SS-RSRQ (dB), SS-SINR (dB) |
| 5G SSB blind scanner | Scan and detect 5G NR signals by searching through GSCN and ARFCN; predefined search in SPAN, frequency range and 3GPP band |
| 5G amplitude and PCI | Amplitude: auto range, reference level offset, attenuation level (auto/manual), preamp; Multi-PCI: filter by strongest and specific PCI (display up to 12 PCI) |
| LTE signal analyzer | Frequency range: 450 MHz to 6 GHz (FR1); analysis bandwidth: Auto, 1.4, 3, 5, 10, 15, 20 MHz; band configuration: manual or selectable band number, absolute radio frequency channel number (ARFCN) |
| LTE cell view and amplitude | Cell view: physical cell ID (PCI), SectorID, GroupID, duplexing, RSRP (dBm), RSRQ (dB), RSSI (dBm); amplitude: auto range, reference level offset, attenuation level (auto/manual), preamp; Multi-PCI: filter by strongest and specific PCI (display up to 8 PCI) |
| a. Three exceptions: Spur at 2Fc-4315.53 for central frequency (FC) in (4265.53-4365.53) with a level of –94 dBm; Spur at 2Fc-1975.53 for FC in (1925.53-2025.53) with a level of –100 dBm; Spur at 2Fc-2458.48 for FC in (2458.48-2491.53) with a level of –100 dBm. | |
| Interfaces | RJ45 LAN 10/100/1000 Mbit/s; WiFi connectivity; USB 2.0 ports (2); USB 3.0 port (1); MicroSD card slot; 3.5 mm headset/microphone port |
| Battery autonomy – Dual carrier (FTB-1v2 Pro) | > 2h |
| Battery autonomy – High-power dual carrier (FTB-1v2 Pro) | > 4h |
| Certification | MIL-PRF-28800F – Class 2 (shock, vibration and drop) |
| Mainframe and storage | Quad-core processor / 4 GB RAM / Windows 10 with 128 GB internal flash memory; MicroSD slot for external storage |
| Screen | Touchscreen, color, 1280 × 800 TFT 203 mm (8 in) |
| Operating temperature | 0 °C to 50 °C (32 °F to 122 °F) |
| Storage temperature | –40 °C to 70 °C (–40 °F to 158 °F) |
| Size (H × W × D) – Double-depth module back / Dual carrier | 210 mm × 254 mm × 96 mm (8 ¼ in × 10 in × 3 7/8 in) |
| Size (H × W × D) – High-power dual carrier | 210 mm × 254 mm × 122 mm (8 ¼ in × 10 in × 4 ¾ in) |
| Weight – Dual carrier | 2.9 kg (6.4 lb) |
| Weight – High-power dual carrier | 3.7 kg (8.2 lb) |