| Singlemode fibera | |
| Switch | 2×2 XT; 1×2 XT; 1×4; 1×8; 1×12; 1×16; 1×24; 1×32 |
| Technology | Opto-Mech; MEMS |
| Insertion loss (dB) at 1310 nmb, c | 2×2 XT: 0.9; 1×2 XT: 0.9; 1×4: 1.2; 1×8: 1.6; 1×12: 1.8; 1×16/1×24/1×32: 2.0 |
| Insertion loss (dB) at 1530 nm to 1650 nmb, c | 2×2 XT: 0.7; 1×2 XT: 0.7; 1×4: 1.0; 1×8: 1.2; 1×12: 1.4; 1×16/1×24/1×32: 1.5 |
| Repeatability (dB)d | ±0.02 |
| Back reflection (dB)c, f | 2×2 XT: –50; 1×2 XT: –60; 1×4/1×8/1×12/1×16/1×24/1×32: –50 (–55) |
| Crosstalk (dB)c | 2×2 XT: –65; 1×2 XT: –65; 1×4/1×8/1×12/1×16/1×24/1×32: –50 (–60) |
| Polarization-dependent loss (dB) (typical)c, e | 2×2 XT: 0.09; 1×2 XT: 0.09; 1×4: 0.09 (0.06); 1×8/1×12/1×16/1×24/1×32: 0.11 (0.08) |
| Switching time (ms) | <30; 20; 30 |
| Switch life (cycles) | >107; >109 |
| Operating wavelength (nm) | 1240 to 1680 |
| Fiber type | Singlemode 9/125 µm |
| Input power (damage threshold) (dBm) | 27 |
| Multimode fibera | |
| Switch | 2×2; 1×2; 1×4; 1×8; 1×12 |
| Technology | Opto-Mech; MEMS |
| Insertion loss (dB)g, c | 1.0; 1.2 |
| Repeatability (dB)c, d | ±0.02 |
| Stability (15 minutes)c | ±0.01 |
| Back reflection (dB) | 2×2: –30; 1×2: –35; 1×4/1×8/1×12: –30 |
| Crosstalk (dB) | 2×2: –55; 1×2: –60; 1×4/1×8/1×12: –30 |
| Switching time (ms) | 30 |
| Switch life (cycles) | >107; >109 |
| Wavelength range (nm) | 780 to 1360 |
| Fiber type | 50/125 OM3 |
| Input power (damage threshold) (dBm) | 27 |
| Polarization maintaining fibera | |
| Switch | 2×2; 1×2; 1×4; 1×8; 1×12 |
| Technology | Opto-Mech; MEMS |
| Insertion loss (dB)b, c | 1.0; 1.2 |
| Repeatability (dB)c, d | ±0.02 |
| Back reflection (dB)c, e | –55 |
| Stability (15 minutes)c | ±0.01 |
| Crosstalk (dB) | –65; –55 |
| Switching time (ms) | <30 |
| PER (dB)b | >18 |
| Axis alignment | Slow axis aligned with key |
| Switch life (cycles) | >107; >109 |
| Wavelength range (nm) | 1240 to 1680 |
| Wavelength dependant loss (dB)f | ±0.02 |
| Fiber type | PM13 Panda |
| Input power (damage threshold) (dBm) | 27 |
| a. Specifications valid at 23 °C ± 5 °C. b. Insertion loss per module, including one connector. c. Typical specifications. d. Repeatability values are for 100 cycles per switch module at constant temperature with stabilized source/meter. e. At 1550 nm. f. With APC connectors. g. Excluding connectors at 1300 nm. (PM fiber notes) a. Specifications valid at 23 °C ± 5 °C. b. Excluding connectors. c. Typical specifications. d. Repeatability values are for 100 cycles per switch module at constant temperature with stabilized source/meter. e. With APC connector. f. Over ±20 nm range from 1310 and 1550 nm. | |
| Switch | 2×2, 1×2, 1×4; 1×8; 1×12; 1×16, 1×24, 1×32 |
| Number of slots | 1; 2; 3; 4 |
| Dimensions (H × W × D) | 1 slot: 25 mm × 159 mm × 185 mm (1 in × 6 1/4 in × 7 5/16 in) 2 slots: 50 mm × 159 mm × 185 mm (2 in × 6 1/4 in × 7 5/16 in) 3 slots: 75 mm × 159 mm × 185 mm (3 in × 6 1/4 in × 7 5/16 in) 4 slots: 100 mm × 159 mm × 185 mm (4 in × 6 1/4 in × 7 5/16 in) |
| Temperature | Operating: 0 °C to 40 °C (32 °F to 104 °F) Storage: –40 °C to 70 °C (–40 °F to 158 °F) |
| Maximum relative humidity | 80 % non-condensing at 40 °C |
| Instrument drivers | IVI drivers, SCPI commands and REST API |
| Remote control | Via LTB and FTB platform services: GPIB (IEEE-488.1, IEEE-488.2), Ethernet and RS-232 |
| Standard accessories | User guide (available online only), certificate of compliance and test report |