Vollständige Spezifikationen

FiberBasix 50 - Handheld testers

Handheld light source/power meter combo delivering simple, accurate measurement of signal attenuation during fiber-optic cable installation

Übersicht

Handheld light source/power meter combo delivering simple, accurate measurement of signal attenuation during fiber-optic cable installation

Leistungsmerkmale

Easy-to-use interface for error-free testing
Interchangeable connectors, for first-class flexibility
Cost-effective, rugged and highly reliable
Ideal for testing and troubleshooting optical premises networks
Available as stand-alone units or in all-in-one test kits including all required accessories (adapters, carrying case, etc.)
Five test kits designed for specific users/testing needs: LAN, outside plant, contractors, FTTH and CATV

Leistungsmerkmale

Easy-to-use interface for error-free testing

Interchangeable connectors, for first-class flexibility

Cost-effective, rugged and highly reliable

Ideal for testing and troubleshooting optical premises networks

Available as stand-alone units or in all-in-one test kits including all required accessories (adapters, carrying case, etc.)

Five test kits designed for specific users/testing needs: LAN, outside plant, contractors, FTTH and CATV

Anwendungen

Link-loss characterization

Channel Power measurements

Technical specifications
ELS-50 specifications
Model	23BL	235BL	12C
Central wavelength (nm)^b	1310 ± 20 / 1550 ± 20	1310 ± 20 / 1490 ± 10 / 1550 ± 20	850 ± 25 / 1300 +50/–20
Spectral width (nm)^{b, c}	≤5	≤5	≥40/120
Output power (dBm)	≥–5	≥–5	≥–24 (50/125 μm)
Power stability (dB)^{b, d}	±0.10	±0.10	±0.10
Battery life (hours)^b	60	60	45
Tone generation (Hz)	270, 1 k, 2 k	270, 1 k, 2 k	270, 1 k, 2 k
Warranty (year)	1	1	1
EPM-50 specifications
Model	EPM-53	EPM-53X
Power meter port	InGaAs	InGaAsX
Power range (dBm)^b	10 to –60	26 to –50
Number of calibrated wavelengths^c	5	5
Power uncertainty^d	±5 %	±5 %
Resolution (dB)	0.01	0.01
Display units	dB/dBm/W	dB/dBm/W
Tone detection (Hz)	270, 1 k, 2 k	270, 1 k, 2 k
Battery life (hours)^d	>300	>300
Warranty (year)	1	1
^{ELS-50: a. All specifications valid at 23 °C ± 3 °C, with an FC/UPC connector. b. Typical. c. Rms for lasers and —3 dB width for LEDs. d. After 15 minutes warmup; expressed as ± half the difference between the maximum and minimum values measured over 8 hours. EPM-50: a. All specifications valid at 23 °C ± 3 °C, with an FC/UPC connector. b. In CW mode. c. Wavelengths: 850 nm, 1300 nm, 1310 nm, 1490 nm, 1550 nm. d. Typical.}